In this review, the author shows a simple way how to embed the sunroof into the car roof with your own hands. There is nothing complicated here - if you wish, everyone can handle it.
If you have never done this before, be sure to read the article to the end.
It will take the hatch itself for tapping into the roof (you can buy it at a store selling auto parts), masking tape, and a power tool with which you can make a hole.
Before installation, we make accurate measurements of the hatch and determine its future location on the roof of the car.
Next, we paste strips of masking tape on the roof so that you can make markings. We drill a hole for a jigsaw file.
We recommend reading: how to remove rust on a car body without repainting.
The main stages of work
At the next stage, cut out a piece of the roof in the marked area.
Please note that using an electric jigsaw instead of an angle grinder will avoid sparks inside the car.
After trying on the hatch and fitting the hole, the author applies sealant.
Then we install the hatch on its seat and fasten it with screws with a press washer to the mounting frame.
For details on how to embed the sunroof into the car roof with your own hands, we recommend that you look in the video on our website.
