Bouquet of soft toys

Pin
Send
Share
Send

The necessary material for making a bouquet of soft toys:
1. Soft toys "Teddy" gray - 7 pcs.
2. Gift wrapping paper yellow.
3. Foam circle.
4. A piece of hose 15 cm long.
5. Sisal red.
6. Satin ribbon in purple.
7. Wide transparent adhesive tape.
8. Narrow paper tape.
9. Thermogun.
10. Knitting wire.
11. Nippers.
Stages of making a bouquet:
1. Cut a circle of the desired diameter using a clerical knife from the foam. The diameter of the circle depends on the number of toys and their size. For my bouquet, I cut a circle with a diameter of 12 cm. In the center of this circle of foam, it is necessary to mark the hole with a piece of hose.

2. Pour this hole well with glue from the heat gun and insert a piece of hose there, after which all the glue should also be carefully treated around the hose.

3. In order for the hose not to tear the paper and no one would guess that we used the hose at all, its tip must be wrapped with a wide transparent adhesive tape. If the hose is too thin, then it can be completely wrapped with tape.

4. Using yellow gift wrapping paper and a thermal gun, it is necessary to decorate the foam so that it is not visible.

5. It is also necessary to form our bouquet with the help of yellow wrapping paper. This can be done with paper of a different color or from another material, which will make the bouquet even more beautiful. The most important thing is that the seam of the paper must be glued very carefully so that it is not visible.
6. The center of the handle of our bouquet is wrapped with paper tape.
7. For the manufacture of our bouquet, soft toy trinkets of small size (5-7 cm) are best suited. You can use not only bears, but also kittens, dogs, rabbits, etc. The main thing is that all the toys would be the same.

8. In order to attach soft toys to the foam, it is necessary to cut 7 pieces of knitting wire and pierce the toy near the tail.
9. Whatever the wire pierces through our bear, it and the wire itself must be carefully treated with glue from a heat gun.

10. To do everything that is described in paragraphs 7 and 8 with the remaining toys.
11. Now proceed to the assembly of the bouquet. To do this, glue a little red sisal into the bouquet, then place the bears in a circle on it in a slight slope so that they touch each other with their legs, and put one bear in the center of the bouquet.

Do not forget that when assembling the bouquet, the seam of the wrapping paper should be at the back.
12. In order that the bouquet does not seem empty, you can add more sisal, so that it covers the bears a little. The paper tape on the handle of the bouquet must be closed with a satin ribbon in purple.
13. In the center of this tape, I stuck a flower with the inscription "With all my heart."
14. So our cute bouquet of soft toys is ready, which will be a wonderful gift not only for a very little princess, but also for a young girl. This bouquet will never fade!

Pin
Send
Share
Send

Watch the video: How to make a PokemonGO bouquet (December 2024).