To make the process of cooking on vacation in the country as comfortable as possible, you can not do without auxiliary devices. For example, if you decide to fry fried eggs or sausages at the stake, then you will definitely need a practical bonfire stand for the pan, which you can do with your own hands from available materials at hand.
Process for making a pan stand
From a steel pipe of medium diameter, we cut off a segment with a length of 55-60 cm, which will be used as a vertical rack (if necessary, you can make it higher). We cut out triangular wedges on one of the sides, so that in the end we get a “crown” - it is needed to deepen the vertical stand of the bonfire stand into the ground.
The teeth need to be pressed together to get a sharp end (like a crowbar), and then weld the seams with electric welding and clean the joints with a grinder. Also, it will be necessary to weld a support platform made of steel square rods or a profile pipe to a vertical rack.
Then, from a steel square or profile, you need to figure out the grid on which the pan will stand in the process of cooking. The dimensions of the lattice are selected based on the diameter of the largest pan in the camping arsenal of dishes. On the side of the grill, you need to weld a U-shaped part that will mesh with the platform on the rack.
The main stages of the assembly of the construction of the bonfire stand for the pan, see the video on the site. Write in the comments what you think about this homemade product: useful in the household?
