Roller skates are no less popular than skateboards or bicycles. And despite the fact that today many people are switching to using alternative modes of transport - gyro scooters and monowheels - roller skates still remain in trend.
And in order to keep up with the times, the author decided to improve the design, and make a drive electric roller with his own hands.
First of all, the master cuts out a piece of the plate from sheet metal of suitable thickness - it will be attached to the back and heel of the roller.
The main stages of work
Then the master cuts out another piece of the plate, a little smaller. Holes will need to be made in the blanks: separately for mounting and separately for "seats" for bearings. And then the master installs the bearings.
In the next step, the plates are attached to the back of the roller skate. Previously, the master installed a 12V electric motor in a large plate.
Then it will be necessary to install large and small aluminum pulleys on the shafts of the engine and rear wheel, and tighten the belt.
After that, it remains only to connect the electric motor to the battery, and also make a button. Her master glued the hot glue to the glove. The battery itself is placed in a handbag, which is attached to the belt.
Details on how to make an electric roller for do-it-yourself riding can be found in the video on the website.
