In this review, the author shows how to make a simple fixture for welding racks from a square and baskets with your own hands.
With this device, evenly weld racks and baskets of metal, as well as balusters, will not be difficult.
For the manufacture of homemade products you will need a corner 50x50 mm 29 cm long, a profile pipe 30x20 mm 9.5 cm long, as well as a 12 * 12 mm square and an M8 bolt.
We recommend reading: home-made conductor for welding profile pipes.
The main stages of work
First of all, in one of the shelves of the corner, the author makes a cutout 13 cm long and 4 cm wide.
It is necessary to drill a hole in the profile pipe, and then the author welds the nut.
The profile pipe will need to be welded to the corner so that the nut with the fixing bolt is at the bottom.
At the next stage, a piece of square bar 12 * 12 mm is inserted into the profile pipe. You need to weld a steel plate to it.
The resulting part is used as an extension cord, thanks to which racks from a square of different lengths can be welded to the basket.
For details on how to make a fixture for welding racks and baskets with your own hands, we recommend that you look in the video on our website.
