Share
Pin
Tweet
Send
Share
Send
![](http://img.uaft2404.org/img/sdela-2019/kalmar-iz-bumagi.jpg)
To work, you need to take:
- a square sheet of paper;
- black felt-tip pen;
- scissors.
![](http://img.uaft2404.org/img/sdela-2019/kalmar-iz-bumagi-2.jpg)
We start squid making by adding a square diagonally.
![](http://img.uaft2404.org/img/sdela-2019/kalmar-iz-bumagi-3.jpg)
After this, the obtained triangle needs to bend the side corners towards the center line.
![](http://img.uaft2404.org/img/sdela-2019/kalmar-iz-bumagi-4.jpg)
![](http://img.uaft2404.org/img/sdela-2019/kalmar-iz-bumagi-5.jpg)
Now turn the sides of the resulting square.
![](http://img.uaft2404.org/img/sdela-2019/kalmar-iz-bumagi-6.jpg)
Make the bend of the bottom corner.
![](http://img.uaft2404.org/img/sdela-2019/kalmar-iz-bumagi-7.jpg)
We begin to straighten the blank of the future squid, giving it a more elongated shape. To do this, we straighten its right side and fold it into a triangle.
![](http://img.uaft2404.org/img/sdela-2019/kalmar-iz-bumagi-8.jpg)
![](http://img.uaft2404.org/img/sdela-2019/kalmar-iz-bumagi-9.jpg)
Do the same with the left side of the squid. It turned out a rhombus.
![](http://img.uaft2404.org/img/sdela-2019/kalmar-iz-bumagi-10.jpg)
In the upper part of the resulting rhombus we make two small cuts on the sides.
![](http://img.uaft2404.org/img/sdela-2019/kalmar-iz-bumagi-11.jpg)
Bend the paper to the side and get the tail fin of our cephalopod mollusk.
![](http://img.uaft2404.org/img/sdela-2019/kalmar-iz-bumagi-12.jpg)
Now let's get to the front of the squid. First, flip the workpiece to the other side.
![](http://img.uaft2404.org/img/sdela-2019/kalmar-iz-bumagi-13.jpg)
At the triangle located in the middle, we will make a fold at its base.
![](http://img.uaft2404.org/img/sdela-2019/kalmar-iz-bumagi-14.jpg)
Bend the triangle down and form another fold. The remaining triangle of a slightly smaller size will be the squid's head.
![](http://img.uaft2404.org/img/sdela-2019/kalmar-iz-bumagi-15.jpg)
From the lower remaining part we will form the tentacles of the mollusk. To do this, using scissors, make cuts on both sides.
![](http://img.uaft2404.org/img/sdela-2019/kalmar-iz-bumagi-16.jpg)
We bend small triangles on the sides in the opposite direction.
![](http://img.uaft2404.org/img/sdela-2019/kalmar-iz-bumagi-17.jpg)
The remaining part is cut into strips, these will be the tentacles of the mollusk.
![](http://img.uaft2404.org/img/sdela-2019/kalmar-iz-bumagi-18.jpg)
The tips of the tentacles can be slightly twisted using a round small object (for example, toothpicks).
![](http://img.uaft2404.org/img/sdela-2019/kalmar-iz-bumagi-19.jpg)
It remains to draw eyes, our squid from paper is ready.
![](http://img.uaft2404.org/img/sdela-2019/kalmar-iz-bumagi-20.jpg)
Share
Pin
Tweet
Send
Share
Send